• VOICE MESSAGES
If you subscribe to voice mail, your wireless provider will furnish you with
a voice mailbox number. You need to save this number to your phone to
use voice mail. When you receive a voice message, your phone lets you
know by beeping, displaying a message, or both. If you receive more than
one message, your phone shows the number of messages received.
Save your voice mailbox number
Your wireless provider may have already saved your voice mailbox number
to your phone. If so, the number will appear in the display in Step 2. Press
OK to leave the number unchanged.
1
At the Start screen, press Menu 01-3-2 (Messages > Voice messages >
Voice mailbox number).
2
After a brief pause, the Voice mailbox number screen appears in
the display.
3
If the box is empty, enter the voice mailbox area code and number.
4
Press OK. Your phone confirms the number has been saved.
Tip: Save yourself the trouble of entering the mailbox codes each
time you dial voice mail. For more information, see “Automate
voice mail” later in this section.
Call and setup your voice mail
1
Once you have saved the voice mailbox number, press and hold
1
.
2
When you connect to voice mail and the prerecorded greeting begins,
follow the service’s automated instructions to setup your voice mail.
Listen to your voice messages
Once you have setup voice mail, you can dial the number in one of four ways:
•
Dial the number using the keypad.
•
Press and hold
1
.
•
Press Listen if there’s a notification message in the display.
6200.ENv1_9356027.book Page 69 Wednesday, July 7, 2004 3:40 PM
[ 70 ]
•
Press Menu 01-3-1 (Messages > Voice messages > Listen to
voice messages). After a brief pause, your phone dials the voice
mail number.
Once you connect and the prerecorded greeting begins, follow the
automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called “dialing codes” into phone numbers
such as voice mail and then save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Note: Each voice mail service can vary. The examples and steps
that follow are for clarification. Check with your wireless provider
if you have specific questions about your voice mail service.
WRITE DOWN SOME INFORMATION
1
Write down your voice mailbox number.
2
Call and check your voice mail as you normally would.
3
Write down your step-by-step interaction with the recorded prompts.
Keep in mind that each voice mail service may vary. However, it
should look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press
1234, press pound key.
Important: Be precise. You will need this information in “Setup
voice mail with dialing codes” later in this section.
LEARN HOW TO INSERT DIALING CODES
Press
s
repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the
dialing string.
For example, press
s
four times to display the “w” (wait character).
Pause briefly and the wait character is inserted into the dialing string.
Available dialing codes are as follows:
6200.ENv1_9356027.book Page 70 Wednesday, July 7, 2004 3:40 PM
[ 71 ]